How to measure a Refrigerator – Fridge Dimensions & Sizes

How to measure a Refrigerator – Fridge Dimensions & Sizes

Measure your refrigerator’s size in cubic feet with these steps. Multiply the refrigerator’s length by its width and depth. Then, find the total and divide it, considering there are inches in a cubic foot. This calculation reveals the refrigerator’s size in cubic feet, aiding effective space planning.

Choosing the right refrigerator dimensions and size is crucial in creating a functional and stylish kitchen. The dimensions of a standard refrigerator are between 24 and 40 inches wide, 62 and 72 inches tall, and 29 and 36 inches deep.

The guide on refrigerator sizes provides valuable information to help you how to measure a refrigerator. Your available space and select the appropriate fridge for your kitchen and family needs.

There are different significant elements to consider when looking for fridge dimensions and sizes: How to measure a Refrigerator follow this ultimate step-to-step guide.

Table Of Contents:

  • Understanding some basics before measuring:
  • Why measuring a refrigerator is important:
  • Steps to How to Measure a Refrigerator
  • All types of Refrigerator dimensions & their Sizes:
  • Selecting the Right Size for Your Needs
  • Conclusion
  • FAQ’s

Understanding some basics before measuring:

Measuring your refrigerator starts with the fundamental dimensions – height, width, depth, allowance for ventilation and door swing clearance. Begin by taking accurate measurements of these three aspects to ensure compatibility with your kitchen space.

Height:

Measure from the floor to the highest point on the refrigerator, including any hinges or protruding parts. Ensure there is enough space above for ventilation.

Width:

Measure the width from one outer edge to the other. Take note of any handles or door hinges that may add extra width.

Depth:

Measure the depth from the back to the front, including any handles. This is crucial for ensuring the refrigerator doesn’t protrude too far into your kitchen.

Allowance for Ventilation:

Make sure there is enough room around the refrigerator for optimum ventilation. For the recommended clearance, consult the manufacturer’s instructions.

Door Swing Clearance:

Examine the refrigerator’s door swing to check that it is clear. There is enough space for the doors to open completely without being obstructed. 

By following these instructions you can easily verify: How to measure a Refrigerator – Fridge Dimensions & Sizes

Why measuring a refrigerator is important:

Ensuring Proper Fit:

Precise measurements ensure that the refrigerator fits neatly into your kitchen space without any problems relating to door clearance and blocked pathways

Avoiding Unnecessary Returns or Exchanges:

To start with, the right measurements assist you in selecting a refrigerator fit for your space demands hence reducing the possibility of purchasing an inappropriate size and taking it back to the seller or exchanging it as needed. 

Efficiently Planning Storage and Organization:

You should use the dimensions so that you have an effective planning and organization of your storage in them to ensure that it suits your needs for which they would be working at fulfilling. For your convenience, we’ve provided an article for you on how to organize refrigerator.

Steps to How to Measure a Refrigerator:

Step 1: Gather Necessary Tools

  • Tape measure.
  • Pen or pencil.
  • Piece of paper to record your measurements.

Make sure that you have all the necessary tools for work – a tape measure, pen, or pencil to mark out everything and create lines and notes about sizes somewhere on a notepad.

Step 2: Measure the Height

How to measure a refrigerator: To accurately measure the fridge dimensions and sizes: fridge, start from the floor and then stretch your tape measurer to its highest point which is normally at either the upper edge or hinges if they stick out.  

Keep the tape measure straight and vertical as you take the measurement. Record the height measurement for future reference.

Step 3: Measure the Width

Measure the width of a refrigerator from one outside margin to another, may it have any handles or hinges. 

To properly prepare for placing your refrigerator, measure the distance between the wall and the counter as well as the distance between any nearby cabinets that will be close to the refrigerator area. Use a measuring tape to get the exact dimensions.

Step 4: Measure the Depth

Use a tape measure to measure from the rear to the front of your fridge to find its depth.

Start at the back of the fridge and follow the contour of the appliance as you extend the tape measure to the front. Record the measurement to ensure you have the correct depth for your fridge. 

Step 5: Consider Additional Ventilation Space

Measure the room and note the constraints for width, height, and depth to make sure your new fridge will fit in your kitchen or other specified location. This will assist you in selecting a refrigerator that will fit correctly and prevent any placing problems.

Step 6: Calculating the size of refrigerator

Figuring out the size of your refrigerator in cubic feet helps you understand how much stuff it can hold. You just need to measure its length, width, and depth.

How to find out refrigerator size in cubic feet

  1. Measure the length, width, and depth of your refrigerator.
  2. Multiply these measurements together.
  3. Then, divide that total by 1,728 (which is the number of cubic inches in one cubic foot) to get the size in cubic feet.

Example: If your refrigerator is 26 inches wide, 75 inches tall, and 25 inches deep: 26 inches wide X 75 inches tall X 25 inches deep ÷ 1,728 cubic inches in a cubic foot = 28.2 cubic feet.

Standard dimensions:

WidthHeightDepth
24 to 40 inches61 to 72 inches28 to 35 inches.

All types of Refrigerator dimensions & their Sizes:

TypeHeight RangeWidth RangeDepth Range 
Top-Freezer  61-69 inches28-32 inches26-32 inches
Bottom-Freezer67-70 inches29-36 inches29-34 inches
Side-by-Side65-72 inches32-36 inches29-35 inches
French Door66-70 inches30-36 inches28-34 inches
Compact/Mini Fridge19-36 inches18-24 inches17-24 inches
Counter-Depth68-72 inches35-36 inches24-30 inches
Built-in80-84 inches36-48 inches24-30 inches

Tips for Measuring Built-in Refrigerators:

Many built-in refrigerators will need exact measurements to fit seamlessly into your kitchen unit.  

Cabinet Cutout Measurements:

Measure the height, width, and depth of the cabinet cutout where the refrigerator will be installed.

Door Clearance for Built-ins:

Consider the space required for the refrigerator doors to swing open without any obstruction.

Selecting the Right Size for Your Needs:

Now that you have all the measurements, it’s time to match them with your specific needs.

Family size and storage needs:

Consider the size of your household and the amount of food storage you require.

Kitchen space limitations:

Ensure the refrigerator dimensions align with your kitchen layout and design.

Energy Efficiency:

Check the energy efficiency rating of the refrigerator to save on long-term operational costs. Or you can get it from our article how many amps does a refrigerator use.

Conclusion:

Taking the right measurements while getting a refrigerator is crucial in enabling it to integrate properly into your kitchen size and address your storage needs. By following the above step-by-step guide on how to measure a refrigerator, you can determine what is good and easily choose between suitable fridge dimensions and sizes. However, do remember to take into account factors like lack of kitchen space, number of family members, and usage patterns. They would guide you better in this regard.

You can get info from our article if you are looking for the best undercounter refrigerator.

FAQ’s;

How do I know what size my refrigerator is?

To know the size of your refrigerator, look for the product specifications normally found on a label on the ‘inside’ part or behind the refrigerator’s back cover written by the manufacturer.  

Do fridge dimensions include handles?

Typically, refrigerator dimensions include the body of the appliance but may exclude handles. Nonetheless, it is important to cross-check this information in the product description since some of these dimensions shall be derived when an individual measures the entire machine rather than just measuring from one handle end to the other.

How do you measure a refrigerator to replace it?

When replacing a refrigerator, measure the height, width, and depth of the existing unit. Additionally, consider any extra space needed for proper ventilation and door clearance. Cross-reference these measurements with the specifications of potential replacement models to ensure a proper fit.

Do refrigerator measurements include hinges?

Refrigerator measurements usually include the main body but may exclude protruding elements like hinges. Make specifications checks for the product, as some manufacturers state dimensions with and without hinges to get an understanding of the size of the refrigerator.

shahzoon naz

shahzoon naz

Shahzoon Naz is a freelance Content Writer. He spends most of his time in the kitchen, you will see him in the kitchen and every time cooking something new and tasty.

Save 30% on your next order!

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Leave a Comment